User Manual

Installation & Operation Manual
Registration Information
The Registration Information screen selects the option to collect registration information for each dispense order. The options
are YES and NO (default).
Regist. Info
YES / NO
1. Use the Scroll key to move the cursor to either YES or NO.
2. Press Enter to advance to the Keypad Timeout screen.
Keypad Timeout
• Timeout parameter corresponds to the time it takes to validate after all dispense order data has been entered. If the Enter
button is not pressed within the time allocated, the keypad display goes back to initial menu and the input data is erased.
• The Keypad Timeout is between zero to 255 seconds (0 = no timeout) and the default for this feature is 10 seconds.
Keypad timeout
10-
1. Press the Backspace key to erase the current setting.
2. Type in the new setting.
3. Press Enter to advance to the Topo Timer screen.
Topo Timer
• This is the time a user has to top-off a dispense after the complete preset batch has been dispensed.
• If a user has not pressed reset on an RF Meter/Hose within the topoff period, the RF Meter/Hose transmits the dispensed
order quantity to the keypad and locks out the RF Meter/Hose.
• The topoff time is equal to one second for each count. For example, 600= 600 seconds or 10 minutes.
• The topoff timer can be set from zero to 15 minutes.
Topoff Timer
0--
1. Press the Backspace key to erase the current setting.
2. Type in the new setting.
2. Press Enter to advance to the Internal Printer screen.
Internal Printer
Use the Internal Printer screen to print dispense ticket information.
Internal Printer
YES / NO
1. Use the Scroll key to move the cursor to either YES or NO.
To print the dispense ticket on the keypad printer, set this option to
YES.
To print to a remote printer or to not print a ticket, set this option to
NO.
2. Press Enter to advance to the External Printer screen.
External Printer
The External Printer (EPSON LX-300) screen is used to print the report information. This must be set to YES to print reports.
External Printer
YES / NO
NOT:N External printer must be set to No to select
the Barcode Scanner.
1. Use the Scroll key to move the cursor to either YES or NO.
2. Press Enter to accept the setting and advance to the next screen.
• If you select YES, the display advances to the New Superv. PW
screen.
• If you select NO, the display advances to the Barcode Scanner
screen.
Page 17 August 2012