User Manual
Installation & Operation Manual
RADIO RAD MENU
The RAD menu screens are:
• Address (ADR) – toggles the display between the Radio Address and the Radio Prefix screens.
• Network (NWK) – allows you to select the Radio Network.
• Power (PWR) – displays the radio’s transmit (Tx) output power.
• Station (STA) – displays the Radio Network Status.
Select
INI CNF MET REP
To use the internal keypad printer:
1. Use the Scroll key to move the cursor to REP.
Select
190 RAD ... ...
2. Press Scroll two more times to move the cursor to the RAD
selection.
3. Press Enter to display the RAD screen.
Select
ADR NWK PWR STA
4. Use the Scroll key to move the cursor to the information you want
to display.
5. Press Home to go back to the default screens.
Radio Address/Radio Prex
Once you select ADR, you can use the Scroll key to toggle between the Radio Address and the Radio Prefix screens.
Select
ADR NWK PWR STA
1. Use the Scroll key to move the cursor to ADR.
RADIO PREFIX
00:0D:6F:00
2. Press Scroll again to display the Radio Prex screen.
RADIO ADDRESS
01:80:A5:63
3. Press Enter to display the Radio Address screen.
4. Press Enter to return to the selection screen.
Radio Network
The Radio Network default is zero. You need to change this setting only if you have multiple RF FMS systems. All
RF Meter/Hose Radio Network settings must match the Standalone Keypad setting.
Select
ADR NWK PWR STA
1. Use the Scroll key to move the cursor to NWK.
2. Press Enter to display the Radio Network screen.
RADIO NETWORK
0--
3. Press Enter to return to the selection screen.
Page 23 August 2012