User Manual

Installation & Operation Manual
STANDALONE KEYPAD DESCRIPTION
Disclaimer
The user/purchaser is expected to read and understand the information provided in this manual, follow any listed Safety
Precautions and Instructions and keep this manual with the equipment for future reference.
The information in this manual has been carefully checked and is believed to be entirely reliable and consistent with the
product described. However, no responsibility is assumed for inaccuracies, nor does Badger Meter Inc. assume any liability
arising out of the application and use of the equipment described.
Product Identication Information
Record the product identification numbers from the nameplate here.
Model Number _______
Serial Number _______
Tag Number _______(if applicable)
Keypad Installation
• Mount the keypad upright with the antenna pointing upward, near a 120V AC electrical outlet.
• Mount the keypad to a structurally sound wall through the two holes on the top of the keypad case and one hole on the
bottom of the keypad.
• Height on the wall should be 5 feet to 6 feet.
• Avoid direct, significant, heat sources.
• Do not mount the keypad behind any steel objects (tool storage cabinets or metal chain link fences) that may block the
RF communication signals.
Mounting Dimensions for Keypad
(Holes on Keypad are Threaded for M6 x 1 Screw)
7-5/8”
3-13/16”
7-3/8”
Figure 1: Keypad Installation
Page 5 August 2012