User's Manual

THE PORTABLE INTERROGATOR User Guide
Revised July 2000
Page 60 of 63
The Portable Interrogator 400 will perform the quick read and display one of these
results:
• The reading will be displayed in the reading box, and the successful audio tones
will be sounded.
• The tamper status will be displayed in the reading box and the tamper audio tones
will be sounded.
• No Response will be displayed in the reading box and the no response audio tones
will be sounded.
DIALOG Quick Read
The Dialog Quick Read screen is very similar to the TRACE Quick Read screen.
The DIALOG Quick Read process follows these steps:
• Enter the Network ID number of the module you wish to interrogate
• Press the READ button or the thumb button on the DIALOG wand
• Record the reading and or the module number that is displayed
To enter the network ID number, press the Net ID button. The Portable Interrogator 400
will display the numeric keypad. Enter the Network ID number (use the Back button to
erase an entry) and press the Enter button when done. (Remember that the network ID
must be between 1 and 63.) The Portable Interrogator 400 displays the DIALOG Quick
Read screen with the Network ID number displayed.
To perform the interrogation process, press the Read button on the screen or press the
thumb button on the DIALOG wand. The Portable Interrogator 400 will interrogate the