User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 17 of 62
Press the Retry button on the screen and reenter your PIN correctly to display the Main
Menu.
If you press the Cancel button, you will return to the Log-in screen.
On the Log-in screen, if you press the Exit to DOS button, you will have to enter a
special PIN. The ReadAll will display the PIN keyboard for your entry. Note that you
should not Exit to DOS unless directed to do so by Badger Meter Technical Support.
The ReadAll Main Menu
After successfully logging into the ReadAll, you will see the Main Menu.
There are four functions on the main menu to choose from:
• Logout – Return to the Log-in screen for the next ReadAll user
• Quick Read – Use the ReadAll to read meters when you do not have a route
loaded (i.e., for checking a transponder, for obtaining final reads, troubleshooting,
etc.)