User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 19 of 62
If the ReadAll currently has no route for meter reading, the ReadAll will remind you to
connect the cable to its serial port and the port on the PC.
Press the OK button and you’ll see this screen.
Pressing the Start button begins the communication process. Note that the ReadAll uses
the same serial communications method and the same transfer file format as the PI. If
you are using CONNECT or RMS, choose the PI as the device to which you are
communicating. In this manner, no changes are required for your Route Management
software to work with the ReadAll.