User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 20 of 62
If you wish to cancel the communications when they are in progress, press the reset
button above the touch screen (“”). The ReadAll will cancel its communications with
the Route Management Software.
In a future release, CONNECT will communicate directly with the ReadAll when it is
placed into the office cradle. This method will be faster and allow for easier loading and
unloading of the routes to and from CONNECT.
Send Readings
When you have finished reading meters, you are ready to send the readings to the Route
Management software. From the Transfer Routes menu press the Send Readings button.
If the ReadAll has no route stored, it will suggest that you first load a route before
sending readings back to the Route Management software.
If the ReadAll has a route loaded, it will remind you to connect the serial cable to the
ReadAll serial port, and to verify that the PC is also correctly connected to the serial
cable.
Once that is complete, you can press the OK button and you’ll see this screen.