User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 25 of 62
THE DETAILS – READING METERS WITH THE
READALL
After loading a route, the next step in the reading cycle is to read the meters in the route.
To begin reading, press the Read / Program Meters button on the Main Menu. You will
see the first account in the route. (If you have pressed the Read / Program Meters button
and have read some meters in the route already, when you press the button the ReadAll
will display the account that was next to be read in the route when you left the Read /
Program Meters function.) The Read screen looks like this.
The reading screen display shows customer information in the top section of the screen,
and three buttons along the bottom of the screen. The first two of the bottom buttons
allow you to browse through the meters in the route. When you press the Previous
Account button, the ReadAll will display the meter just before the current one in the
route.
If the current meter is the first one in the route and you press the Previous Account
button, the ReadAll will ask you if you want to stay at the beginning of the route or if you
wish to go to the end of the route.