User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 27 of 62
The functions are:
• Searching for specific accounts by name, address, meter serial number, or
transponder ID number
• Entering comment codes and messages
• Perform a manual read for this meter
• View the High and Low audit limits for this meter (if you have the permission to
do so – more on this later)
• Program this transponder
• Define a new account
• View Progress, settings, or RF diagnostics via the ReadAll Utilities
• Return to the main menu
• Return to the Read screen
More information on these functions is included later in this section.
Reading Meters
The Read Screen shows specific information about the meter to be read including:
• An account name
• The service address
• The serial number of the TRACE transponder or AMR Reading module
• The serial number of the meter
• The type of meter reading technology in use for this meter (TRACE, MANUAL)
• The service that this meter is measuring (Water, Gas, Electric, Reclaim, etc.)
• The meter reading (after the reading has been gathered)
Here is an example.