User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 30 of 62
In either case, when the meter reading is completely entered, press the Enter key.
If the reading is within the high and low limits, the ReadAll will record the meter reading
and advance the display to the next meter in the route. If the reading is above the high
limit or below the low limit, the ReadAll will tell you that the entered meter reading was
high or low, and it will ask you to re-enter the reading. This is what you will see if you
enter a reading that is above the high limit.
Here is what you will see if you enter a reading below the low limit.
Press the OK button and the ReadAll will display the numeric keypad again. Re-enter the
meter reading and press Enter.
If the second meter reading matches the first meter reading, the ReadAll records the
reading and displays the next meter in the route. If the two meter readings do not match,
the ReadAll will alert you that the two readings are different and will return to the read
screen for this meter as if nothing happened.