User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 35 of 62
The ReadAll gives you a number of ways to find a particular meter through the searching
menu. When you are displaying a meter to read, press the menu button to display the
Read Menu screen.
From the reading menu, press the Search button. The ReadAll will show you the Search
Menu.
There are four different ways to search for a particular meter.
• Find a meter that has a particular value in one of the four the ReadAll fields
(name, address, transponder serial number, or meter serial number)
• Find the start of a particular route within the ReadAll (FUTURE RELEASE – IN
PROGRESS)
• Go to the first account in the current route
• Go to the next unread meter in the current route.
If you wish to go to the start of the current route or the next unread meter in the current
route, press the corresponding button. The ReadAll will display the read screen for that
meter.
If you wish to find a meter that has a particular name or is at a particular address, press
the Search Fields button. The ReadAll will display the Search Fields screen to allow you
to specify the information.