User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 41 of 62
From the Read Menu, press the Utilities button and you’ll see this screen.
The functions on the Utilities Menu are:
• Progress – a display of meter reading statistics to help you determine how far
along you are in the route
• Last Read – when reading TRACE transponders, this set of screens will show
technical information about the meter reading received that can be helpful when
investigating a problem
• Settings – which displays the settings currently being used by the ReadAll
• Calculator – a simple calculator in the event you need one
• Battery Info – this screen shows information being reported by the processor
within the battery pack that might be useful when investigating a problem
Progress
The ReadAll keeps records on the total number of meters in the ReadAll, the number of
meters read, the number of meters that were interrogated but failed to report, the number
of tamper reports received, etc. If you wish to view this information, press the Utilities
button from the Read Menu followed by the Progress button from the Utilities Menu.
The ReadAll will display these statistics:
• Total number of meters stored in the ReadAll