User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 42 of 62
• Current number of unread meters, including meters in which an attempt to read
has not occurred
• The total number of meters that have been read
• The total number of meters whose read attempts have failed
• The percentage of meters of the total meters in the ReadAll that have been read
• The total number of Radio functions performed since the route was loaded
• The number of tamper conditions reported (this total does not include any meters
in which the tampers have been reset)
• The number of unexpected manual reads (of meters equipped with automatic
meter reading equipment)
The screen looks like this.
When you have finished examining the statistics and information, press anywhere on the
touch screen. The entire Progress screen is defined as one button that will return you to
the Utilities Menu. To return to meter reading, press the Read Menu button and then the
Back to Read Screen button.
Last Read
If you need additional information regarding the results of the interrogation of the last
meter, press the Last Read button from the Utilities menu. The ReadAll will display the
additional TRACE read information that is not required for meter reading on two separate
screens as follows: