User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 44 of 62
Note that, if the Route Management Software (such as CONNECT or RMS) is set to
communicate with a PI, the settings are stored internally in the ReadAll. The Route
Management Software does not change the settings of the ReadAll when the ReadAll is
communicating via the serial port.
Here are samples of the three Settings screens.
To choose a setting, touch the screen on the empty box and an “X” will appear in the box.
To remove a setting, touch the “X” and the box will be cleared.
Here’s the list of each of the different settings and how it controls the ReadAll’s
operation.