User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 50 of 62
The buttons perform these functions.
• Name – Enter the name for the new account
• Address – Enter the service address for the customer
• Trans # – Enter the transponder number if this is a TRACE account
• Exit – Return to the Read Menu (if you have not saved the new account
information, the new account will not be added to the route list)
• OK – Saves the new account information in the route list, and clears the entries
• Clear – Clear the name, address, and transponder number fields
• Read – This button will be used in a Future release to allow you to read the new
transponder immediately.
Pressing the Name, Address, or Trans # buttons will produce the same result. A special
keyboard screen will be displayed to allow you to enter alphanumeric information into
the field. It looks like this.
Pressing any of the letter buttons displays that letter in the top center window. Pressing
the space button adds a space. If you wish to use the letters J through R, press the “J-R”
button; if you wish to use the letters “S-Z” or the numbers 0 to 9, press the “S-Z / 0-9”
button. If you want to delete the last letter or number entered into the window, press the
Back button. When you have completed the entry, press the Enter button, and you will
return to the New Account screen with the field filled in with your entry.