User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 51 of 62
If you have entries for a new account for name address and transponder number, your
New Account screen might look like this.
Pressing the OK button will add the account to the route list and clear the fields. Pressing
Exit before pressing OK will return you to the Read menu but you will be able to reenter
the New Account screen and the information remains on the screen. The information will
remain on the screen until the OK or Clear buttons are pressed, or when the ReadAll
sends its readings to the Route Management software.
If you press the OK button and return to the Read screen, you will return to the place in
the route where you left off. At the end of the route you will see the new account you
added. In our example above, the read screen for the new account would look like this.
Summary of the Meter Reading Process in The ReadAll
The process of meter reading using the ReadAll is simple and easy to remember. Here’s
a summary of the steps in the meter reading process that includes the buttons you need to
press to perform the ReadAll function.
• Choose the route or routes you wish to read in the Route Management software
o No ReadAll function is needed for this step