User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 52 of 62
• Transfer the route or routes to the ReadAll via the serial communications cable
o Transfer Routes from the ReadAll Main Menu
o Receive Route from the Transfer Routes Menu
o When the transfer is complete, Return to Main Menu from the Transfer
Files menu
• Read the meters in the route or routes
o Read / Program Meters from the ReadAll Main Menu
o Press either of the Read buttons or the upper portion of the Read Screen to
perform a meter reading. In most cases, the ReadAll will advance to the
next account once the reading is completed.
o Change to a different meter in the route using the Next Meter and Previous
Meter buttons if you need to
o Press the Menu button to choose the different reading functions you might
need to perform
• When finished, transfer the readings from the ReadAll back to the Route
Management software via the serial communications cable
o Transfer Routes from the ReadAll Main Menu
o Send Readings from the Transfer Routes Menu
o When the transfer is complete, Return to Main Menu from the Transfer
Files menu