User's Manual Part 1

THE READALL INTERROGATOR User Guide
Revised January 2001
Page 58 of 62
The TRACE Quick Read process follows these steps:
• Enter the ID number of the transponder you wish to interrogate
• Press the READ button
• Record the reading that is displayed
The screen looks like this.
To enter the transponder ID number, press the Transponder button. The ReadAll will
display the numeric keypad. Enter the ID number (use the Back button to erase an entry)
and press the Enter button when done. The ReadAll displays the TRACE Quick Read
screen with the transponder ID number displayed. For example, if the transponder you
want to interrogate has ID number 3876239, the quick read screen would look like this.
To perform the interrogation process, press the Read button. The ReadAll will
interrogate the transponder and display the reading results in the Reading box.