User's Manual
Table Of Contents
- Introduction
- Glossary
- Trimble Ranger Handheld Overview
- Conserving the Battery
- Charging the Handheld Battery
- Handheld Setup for Reading Both ORION ME and ORION CE Endpoints
- Handheld Basic Operations
- Swapping the Battery Pack (Low Battery)
- General Care of the Handheld
- Using the Touch Screen
- Program Startup
- Copyright Screen
- Main Menu
- Reading a Route
- Manual Reads
- Read Results
- Read Menu
- Comments
- Read Direction
- View High/Low
- Manual Read
- _
- Utilities
- Route Info
- Program & Quick Read
- ORION CE
- ORION ME/SE Utility
- Utilities
- PROGRAMMING AN ORION GAS MODULE
- Appendix
- Using the Handheld Keypad
- Hot Keys and Quick Keys
- Technical Support
Page 21
1-12
Installation & Operation Manual
Main Menu
The Main Menu is the starting point for all meter reading operations. There are four options on the Main Menu to choose
from.
Figure 11: Main Menu
Tap and select an option.
Read Route Displays the login screen to begin reading meters.
Route Info Displays information about the meters and routes currently loaded into the handheld.
Program and Quick Read Displays the program for reading meters when a route is not loaded (e.g., checking an ORION
endpoint, obtaining final reads, troubleshooting, etc.) and programs ORION endpoints to set
an RTR odometer, clear a tamper or stop/start an endpoint.
Utilities Displays the Utilities Menu screen to access information on route progress, battery and
settings. The Utilities Menu can also be accessed from the Read Menu.