User's Manual
Table Of Contents
- Introduction
- Glossary
- Trimble Ranger Handheld Overview
- Conserving the Battery
- Charging the Handheld Battery
- Handheld Setup for Reading Both ORION ME and ORION CE Endpoints
- Handheld Basic Operations
- Swapping the Battery Pack (Low Battery)
- General Care of the Handheld
- Using the Touch Screen
- Program Startup
- Copyright Screen
- Main Menu
- Reading a Route
- Manual Reads
- Read Results
- Read Menu
- Comments
- Read Direction
- View High/Low
- Manual Read
- _
- Utilities
- Route Info
- Program & Quick Read
- ORION CE
- ORION ME/SE Utility
- Utilities
- PROGRAMMING AN ORION GAS MODULE
- Appendix
- Using the Handheld Keypad
- Hot Keys and Quick Keys
- Technical Support
Page 23
1-12
Installation & Operation Manual
Reading a Route
Read Route Login
1. Tap Read Route on the Main Menu.
Result: The Pin/User ID Entry login screen displays.
2. Enter a 3 to 5 character personal identication
number (PIN) using the keypad. The PIN is user
dened and can be your name, your initials, an ID
number, etc.
Figure 12: Read Route on Main Menu
3. Tap OK or press ENTER on the keypad.
Result: If your PIN is not valid, an error message
displays: “You MUST enter 3 to 5 characters for your
PIN/ID."
Tap OK and re-enter the PIN.
Tap OK.
When a valid PIN is entered, the Read Screen with the
first account is displayed.
Figure 13: Login Screen