User's Manual
Table Of Contents
- Introduction
- Glossary
- Trimble Ranger Handheld Overview
- Conserving the Battery
- Charging the Handheld Battery
- Handheld Setup for Reading Both ORION ME and ORION CE Endpoints
- Handheld Basic Operations
- Swapping the Battery Pack (Low Battery)
- General Care of the Handheld
- Using the Touch Screen
- Program Startup
- Copyright Screen
- Main Menu
- Reading a Route
- Manual Reads
- Read Results
- Read Menu
- Comments
- Read Direction
- View High/Low
- Manual Read
- _
- Utilities
- Route Info
- Program & Quick Read
- ORION CE
- ORION ME/SE Utility
- Utilities
- PROGRAMMING AN ORION GAS MODULE
- Appendix
- Using the Handheld Keypad
- Hot Keys and Quick Keys
- Technical Support
Page 33
1-12
Installation & Operation Manual
Edit a Message
1. From an account screen with a text message,
tap Menu > Comments > Text Messages. You
may also press Fn+N keys on the keypad from an
account screen to open the Text Message screen.
Note: An account with a text message displays a
green check mark next to Text Messages on the
Comments Menu as shown in Figure 32.
2. Tap in the Message eld to activate it. Drag across
the previous message to highlight it. Then use the
keypad to edit the message.
3. Tap OK to save the edited message to the account.
Delete a Message
1. From the Comments Menu, tap Text Messages.
Result: The Text Message screen opens with the
previously created message.
2. Tap Delete to remove the message for the account.
Result: The Clear? screen displays asking if you want
to clear the text you entered. If you select Yes, the
display returns to the Text Message screen and the
Message field is cleared.
Figure 32: Text Message Created
Figure 33: Account with Text Message
3. Tap OK to return to the Comments Menu when you are nished.
4. Tap Close to return to the account screen.
Result: The green check mark is removed and "TEXT" no longer displays on the account screen.










