User's Manual
Table Of Contents
- Introduction
- Glossary
- Trimble Ranger Handheld Overview
- Conserving the Battery
- Charging the Handheld Battery
- Handheld Setup for Reading Both ORION ME and ORION CE Endpoints
- Handheld Basic Operations
- Swapping the Battery Pack (Low Battery)
- General Care of the Handheld
- Using the Touch Screen
- Program Startup
- Copyright Screen
- Main Menu
- Reading a Route
- Manual Reads
- Read Results
- Read Menu
- Comments
- Read Direction
- View High/Low
- Manual Read
- _
- Utilities
- Route Info
- Program & Quick Read
- ORION CE
- ORION ME/SE Utility
- Utilities
- PROGRAMMING AN ORION GAS MODULE
- Appendix
- Using the Handheld Keypad
- Hot Keys and Quick Keys
- Technical Support
Page 34
1-12
ORION® Automated Meter Reading System for Trimble® Ranger™
Utilities
Utilities is part of the Read Menu and it can also be accessed from the Main Menu. The Utilities menu provides access to the
settings for the software screens and programs. It also provides information about route progress and battery life.
For complete details about the Utilities menu, refer to "Utilities" on page 50.
Erase Read
1. Tap Erase Read on the Read Menu.
Result: The Erase Reading? screen displays the current
account and asks for conrmation to erase the reading
and return the account record to an unread status.
2. Tap Ye s to erase the current reading.
Result: The customer account displays with a blank
reading eld.
Note: If a reading is not stored in the customer
record, the Erase Read option will not display on the
Read Menu.
Figure 34: Erase Read on Read Menu