User's Manual

Page 45
1-12
Installation & Operation Manual
RF
Wildcard Read
The Wildcard Read screen displays a reading for all ORION ME endpoints in range up to 50 readings.
S/N Displays the serial number of the ORION ME endpoint.
Reading Displays a reading for the corresponding endpoint serial number.
Status Displays any potential exception issues such as a tamper (T) or no usage (NU). If no exception is noted, the
Status field is blank.
RSSI Display the numeric value of the RF signal strength.
Clear Clears the current screen. Tap Start Reading to begin reading again.
Save Saves the current reading values.
1. Tap the RF reading tab on the ORION ME/SE Utility
screen to select it.
2. To listen for all endpoints in range, tap the
Wildcard Read tab and then tap Start Reading.
Result: All ORION ME/SE readings within range will
display in a table format.
3. View the readings by tapping the up and down
arrows to the right of the table.
Figure 51: Wildcard Quick Read
Single Serial Number Read
The Single SN screen displays a reading for one ORION ME endpoint.
S/N Displays the serial number of the ORION ME endpoint. The meter type displays to the right of the
serial number.
Reading Displays a reading for the corresponding endpoint serial number.
RSSI Display the numeric value of the RF signal strength.
Midnight Reading Displays the reading taken at the previous midnight hour.
Status Displays how the endpoint was programmed originally and displays any potential exception issues
such as a tamper (T) or no usage (NU). Tap the up and down arrows to view all status messages.
More Displays the RF More Commands screen on which you can access the firmware version, endpoint
date and time, location and full status.