User's Manual
Table Of Contents
- Introduction
- Glossary
- Trimble Ranger Handheld Overview
- Conserving the Battery
- Charging the Handheld Battery
- Handheld Setup for Reading Both ORION ME and ORION CE Endpoints
- Handheld Basic Operations
- Swapping the Battery Pack (Low Battery)
- General Care of the Handheld
- Using the Touch Screen
- Program Startup
- Copyright Screen
- Main Menu
- Reading a Route
- Manual Reads
- Read Results
- Read Menu
- Comments
- Read Direction
- View High/Low
- Manual Read
- _
- Utilities
- Route Info
- Program & Quick Read
- ORION CE
- ORION ME/SE Utility
- Utilities
- PROGRAMMING AN ORION GAS MODULE
- Appendix
- Using the Handheld Keypad
- Hot Keys and Quick Keys
- Technical Support
Page 50
1-12
ORION® Automated Meter Reading System for Trimble® Ranger™
Utilities
The Utilities Menu can be accessed either from the Main
Menu or from the Read Menu by tapping Utilities.
The Utilities Menu has three options: Progress, Battery Info
and Settings.
Progress
1. Tap Progress on the Utilities Menu to see a
summary of the number of meters loaded, number
of meters read and other information about the
routes loaded to the handheld.
Figure 61: Utilities Menu
2. If there is more than one route loaded, tap Route Progress to display a summary per route as shown in Figure 63.
3. Tap Previous or Next to view other route summary information. Previous and Next displays if more than one route is
loaded.
4. Tap Close to return to the Utilities Menu.
Figure 62: Route Progress
Figure 63: Route 1 of 2
Battery Info
The second option on the Utilities Menu is Battery Info.
1. Tap Battery Info to display:
• the percentage of battery power left in the
handheld
• the percentage of battery power left in the
backup battery
• whether or not the battery is charging
2. Tap Close to return to the Utilities Menu.
Figure 64: Battery Information