User's Manual

Page 52
1-12
ORION® Automated Meter Reading System for Trimble® Ranger™
Program Options
1. Tap Program Options on the Settings Menu to
display the rst of three Program Options screens.
2. On the Options 1 of 3 screen, tap in the box next to
the option to choose one or more of the settings
that tell the handheld how to handle certain
operations and conditions.
3. Tap Save to save the settings.
4. To advance to the next screen of Program Options
tap 2 of 3.
Figure 67: Program Options 1 of 3
On the Options 2 of 3 screen, choose the settings for route
alerts.
1. Tap to check the Alert on Route Boundary box to
activate an audible alert if the meter reader crosses
from one route to another.
2. Tap the Serv1, Serv2 and Serv 3 buttons to change
the meter reading direction.
Note: The button names can be changed by the
reading data management software operator to
describe the type of utility (e.g., water, gas, sewer).
Tap the up and down arrows to select.
Figure 68: Program Options 2 of 3
Tap Enlargement Timeout to change the timeout settings for the enlargement feature. Tap the up and down arrows to
select the desired setting. 5000 (5.0 seconds) is the maximum setting.
3. Tap Save to save any changes.
4. To advance to the last screen of Program Options tap 3 of 3.
On the Options 3 of 3 screen, choose the settings for route
loading and for Quick Keys.
1. Tap to choose FTP Server or Memory Stick for
loading/unloading a route.
2. Tap to choose Single Tap or Double Tap for Quick
Key selection.
3. Tap Save to save any changes to the settings or tap
Cancel to return to the Settings menus without
saving any changes.
Figure 69: Program Options 3 of 3