User's Manual

9
5. Place the Badger
®
-Radix
®
Data Collector
over the Programming Accessory.
NOTE: Verify the IR port (the oval shaped
hole on the bottom of the Badger-Radix
unit) is over the opening of the
Programming Accessory.
6. Select [Read] <R>
A message will appear on the screen “The
ORION
®
Transmitter has an invalid meter
type and needs to be returned to Badger
Meter for servicing.” Select OK <Enter>.
7. Select [Start Radio] <S>
8. Select <Enter>.
9. Remove the Badger-Radix unit from the
Programming Accessory.
10. Clear the Odometer Entry box.
Click the <Delete> key until the Odometer
Entry box is empty.