User's Manual

You can choose the ports for both the IR head and the Repeater cable by clicking on the

down arrow and choosing the port. You can also choose the receiving mode for the

Repeater by clicking on the Change Prog. Mode button. Choosing Narrow Band will

focus the Repeater on the Narrow Band Badger

ORION

transmitters. Choosing

Frequency Hopping will focus the Repeater on the newer Orion transmitters using the

Frequency Hopping Spread Spectrum technology, as well as the narrow band

transmitters. Finally, you can choose the Font for the screens. If you wish to keep these

settings, click the OK button. If you wish to discard the changes you made to this screen,

click the CANCEL button.

If you decide to change the font, you’ll see this screen.

Preliminary