User's Manual

Page 11 of 37
Creating and Deleting RF Meters: (Meter and Hose are synonymous)
This set of screens allows the Supervisor to create or delete RF Meters
from the system.
• The RF Meter number can be found on the RF Meter under the
battery pack
• The RF Meter address format is 10 decimal digits (-.---.---.---)
• The RF Meters can be created and deleted
• Maximum 48 RF Meters
• A given keypad can exchange data only with RF Meters whose
address is in this list.
• All RF Meters addresses and ids are unique
• The relationship between tank and RF Meter will be 1:n (one tank
assigned to n RF Meters). Since there will be a relationship
between tank and fluid type, the RF Meter will be assigned to one
fluid type.
• Initially the RF Meter address list is empty
Create Hose
-.---.---.---
Active keys:
Numeric keys,
,
,
Action:
• After validate RF Meter address is entered the tank-hose screen is displayed
• Enter key with no entry Æ moves to Delete Hose screen
• If RF Meter address already used Hose Address Already Used Screen is displayed
Hose Address
Already Used
Active keys:
There is no active key.
This screen is displayed if another RF Meter already uses the last three number of the RF Meter.
If this screen displays check RF Meters in system to make some duplicate RF Meters do not exist, then
check to see if this RF Meter has already been created in the system.
It is displayed for 3 seconds and it comes back to create hose screen.
No Action
The relationship between tank and RF Meter will be 1:n (one tank
assigned to n meters). Since there will be a relationship between tank and
fluid type, the RF Meter will be assigned to one fluid type. Assign the RF
Meter to the tank in which it is connected.
Tank-Hose
Tank No -