User's Manual

Page 34 of 37
Dispense Order Transaction Ticket: A ticket receipt is printed for every dispense
after the completion of the dispense by the
RF Meter.
TRANSACTION TICKET
DD/MMM/YYYY HH:MI
PRODUCT FLUID TYPE 1
QUANTITY 2.1 LTS
OPERATOR N SMITH JOH
RF METER ID 12
WO 1234567890123456
MILEAGE -
REGISTRATION -
TYPE PRE-SET/MANUAL/OUT OF SEQUENCE
LEVEL 999999 LTS
ERROR1 1 (COMMUNICATION ERROR)
ERROR2 3 (LOW BATTERIES)
ERROR3 5 (COUNT ERROR)
• The Ticket is printed on the integrated printed if it is installed.
• A printer must be installed to retrieve dispense order records.
• Product: Fluid dispensed
• Quantity: Exact quantity of fluid dispensed by the Hose
• Operator: Operator who dispensed the fluid
• RF Meter ID: Hose number
• WO: Work Order number
• Mileage: Mileage of vehicle, only printed if configured to YES
• Registration: Registration or License number, only printed if
configured to YES
• Type: The type of dispense:
• Pre-set: Normal Dispense Process
• Manual: Fluid dispensed while RF Meter was in a manual
mode of operation. This is a degraded mode of operation.
• Out of Sequence: Normal Dispense Process, but data not
communicated from the Hose to the Keypad immediately
after the dispense. Out of Sequence quantity is only
communicated through the Supervisor Menu in COM
mode. This is a degraded mode of operation.
• Level: The remaining amount of fluid in the tank used for the
dispense
• Error1…3: Error Message for the dispense:
• Communication Error: Difficulty in communications
• Low Batteries: Change the batteries on the RF Meter/hose
• Count Error: RF Meter had a count error, NOT AN
APPROVED DISPENSE. (For PTB System ONLY)