User's Manual

Page 8 of 37
Tank Initialization:
The tank screens are used to set up the tanks in the system. Each tank is
assigned a number and a starting quantity level in the desired unit of
measure. The following is the process for installing a tank:
• Maximum 8 Tanks
• The tank id ranges from 1 to 8
• By default, the unit type is liters
• Unit type can be quarts, liters, pints or gallons
• The tank quantity setting is updated after each dispense from the
associated tank.
• The quantity setting is Format 5.3 digits (99999.999)
• The tank quantity will be printed out to the nearest whole number
after each dispense on the ticket.
• The Supervisor may update the quantity setting at any time by
entering these screens to change levels
Tank Unit
Tank No -
Active keys:
Numeric keys,
,
,
Action:
• Enter key with no entry jumps to Fluids Screens
Enter a numeric value from 1 to 8 and press
Tank Unit
LITERS
Active keys:
Numeric keys,
,
,
,
Use
to select between LITERS, QUARTS, PINTS, GALLONS
and REMOVE.
Press
to move to the next screen.
Tank Stock Level
No X: ---------