Owner's manual

FUNCTIONAL DESIGNATIONS
1 Cable gland
1)
2 Plug
1)
, interchangeable by Pos 1
3 Screw terminals
2)
(11 +/12–)for input(w)
or (11 / 12) forBus connection acc. IEC 1158-2
3a Screw terminals
2)
for additional inputs / outputs
4 Ground connection
5 Female thread G¼or ¼-18 NPT
3)
for outputI (y1)
6 Female thread G¼or ¼-18 NPT
3)
for air supply (s)
7 Female thread G¼or ¼-18 NPT
3)
for outputII(y2)
8 Direct connection for outputI(y1-d)
9 Feedback shaft
10 Connection manifold forattachment to stroke actuators
11 Connection base forattachmentto rotaryactuators
12 Cover with window and external push buttons
12a Push button protection cover (option -X) (not shown)
1) Cableglands BUSG.
Thedevice is suppliedwithdustprotectioncovers
2) optional:Cageclamps (WAGO)
3) Type of thread is marked at housing.
13a Key MENU
13b Key –DOWN
13c Key +UP
13d Key
ENTER/STORE
15 pneumatic unit withamplifier and connection
16 4 screws for connectionof pneumatic unit
18 built-in pressure gauges for air-supply, output
Y1 and outputY2
19 Cover for electronicconnection compartment
20 Protection screwfor electronicconnection and
electroniccompartment
21 Air vent, dustand waterprotected,
(IP65 and NEMA 4X)
22 Data label
22a Label for Options
25 Tip jacks, 2mmdia. (integrated in Terminals)
26 Arrowis perpendiculartoshaft 9 at angle0degree
Figure 8: Functional designations
Page 15
Functional Designations
August 2014 POS-UM-00009-EN-02