Owner's manual

SRD960 with PROFIBUS PA:
Menu 10: Bus Address
M1 234
½- -½½M,LED3and LED4 flash
Here the bus addressofthe SRDcan be indicated andchanged.The bus
address is in thevalue rangeof0to 127; forthe display 7bitsare required.
Each bit has aspecificvalue (bit 1=1, bit2=2,bit 3=4, bit4=8,bit 5=16,bit
6=32, bit7=64). Thebus addressisthenthe totalofthe individual values.
To display this with 4LEDs, selectionmustbemade betweenthe lower
and upper4bits (whereby thehighest bit8hasnousage andisalways 0).
10.1 Selectionoflower 4bits:
¼¾ ---Mshortflash,LED1longflash
With (+) or (–) keys to selectionofupper 4bits:
10.2Selectionofupper 4bits:
¼ ---¾Mshortflash,LED 4longflash
Upon selection,the bitsare displayed. When moving (+) or (–) keys,the
valueis always changed by 1. Pressing (
)key,the newly enteredadd-
ress will be activated.
Thebus address is thetotal of theindividual values:
Values of the lower 4bitsand the upper 4bits:
– [1] [2] [4] [8] Valueofthe bits–[16] [32] [64] –Value of the bits
----- 0-----0
-1--- 1-1--- 16
- -1--2 --1- -32
-11- -3 -11--48
---1- 4---1- 64
-1-1-5 -1-1- 80
--11 -6 --11-96
- 111-7 -111-112
----18
-1--1 9
- -1-1 10
-11-1 11
---11 12
-1-11 13
--111 14
- 1111 15
Note: Addresses 0and 127 should not be used.Address 126 (delivery condi-
tion)is not permittedfor cyclical operation.
Forfurther information see TI EVE0105P.
In theversionwithLCD indicator, theaddress is displayedindecimal and
hexadecimal number system.
10.3 Address
With LCDindicator,thisfunctionisrecommended,whereby the address
canbecompletely entered, withoutseparationinLSB andMSB.
Thekeys have Autorepeat:By pressingand holding of akey (+) or (–) ,the
value is countedupward, aftersometimeinlargersteps.
SRD Main Menu
8 Setpoint
9 Workbench
10 Bus address
10 Bus address
10.1 Address LSB
10.2 Adresse MSB
10.3 Address
10 Bus address
10.1 Address LSB
10.2 Adresse MSB
10.3 Address
10.2 Address MSB
Dec: 48 Hex:30
Upper3bits ±16
10 Bus address
10.1 Address LSB
10.2 Address MSB
10.3 Address
10.3 Address
Dec:126 Hex:7E
Page 52
Startup
August 2014POS-UM-00009-EN-02