User guide

USB‐TO‐SERIALADAPTER USERGUIDE

Ver1.9.4©Copyright20 08,SocketCommu nications,Inc.dbaSocketMobile Inc.Allrightsreserved.
Mac OS X Setup
The driver is in disk image (.dmg) format on the USB-to-Serial Adapter CD-ROM. Find it in the
Mac OSX folder. Double clicking the .dmg file mounts an image to the desktop, you must
then find that icon, double click it, and there will be a single package installer file inside.
Note: There are 2 installers, one PowerPC based Macs running OSX v10.2.8-v10.3, and one for
PowerPC & Intel based Macs running OSX v10.4-v10.5. To find out what processor you have in
your Mac, click on the Apple icon in the top left corner and choose "About this Mac".
INSTALLATION
Follow these steps to install the driver for Mac OS X
1. Identify the correct installer (see note above), then run the installer by double clicking
on the icon for SocketSerialInstaller-10_3-PPC.dmg or SocketSerialInstaller-10_4.dmg.
When the introduction screen appears click Continue to proceed with the installation
and follow the instructions on screen
2. When the installation is complete, reboot the computer
15
