Datasheet

www.bafopower.com
Understanding BAFO’s Part Number Glossary of Terms
Adapter
A cord or block style device with different ends that allows different devices to connect.
AC Alternating Current. Electric current that rises from zero to a maximum in one direction, falls
to zero and then rises to a maximum in the opposite direction, and then repeats another
cycle.
Amperage Amps/Amperes/Ampacity/Rated Amperage - measurement of the ow rate of electricity. If
you think in terms of water through a hose, amperage would be a measure of water volume
owing through the hose.
ANSI American National Standards Institute (ANSI) is a standards setting agency for the United
States.
AS / NZS 3112 1993 The standard to which plugs and receptacles of the Australian congurations (AU1-10P, AU2-
15P and AU1-10R, AU2-15R respectively) must be manufactured.
AWG American Jacket Gauge. The standard system for designating the physical size of current
carrying Jacket.
BSI British Standard Institution (BSI) is the standards setting and certication agency for the
United Kingdom.
BS 546A The standard to which plugs and receptacles of the United Kingdom congurations (UK2-15P
and UK2-15R, respectively) must be manufactured. Wiring devices of these congurations
are generally utilized in countries which were part of the United Kingdom when electricity was
introduced into the country, i.e. South Africa and India.
BS 1363A The standard to which plugs and receptacles of the United Kingdom congurations (UK1-
13P and UK1-13R, respectively) must be manufactured. All plugs, reJacketable and those
molded on to power cords,must be equipped with an internal fuse. Fuses are available in 3, 5,
10 and 13 ampere ratings. The ratings of the plug is, therefore, contingent upon the rating of
the fuse which is installed into it.
Cable A group of insulated conductors twisted together and contained within an overall insulating
jacket.
Cable Harness A string of cables and/or Jackets which transmit informational signals or operating currents
(energy). The cables are bound together by clamps, cble ties, cable lacing, sleeves, electrical
tape, conduit, a weave of extruded string, or a combination thereof.
CCC China Compulsory Certication
CE Conformite Europeene. A European standard of safety. The CE marking on end products
indicates compliance with all applicable directives.
CEBEC Comite Electrotechnique Belge (CEBEC) is the certication agency for Belgium.
CEI Comitato Elettrotecnico Italiano (CEI) is the standards setting agency for Italy.
Understanding BAFO’s Part Number
57
Glossary of Terms
California Ofce
Toll Free: 800.588.8599
E-mail: [e-mail]
New Jersey Ofce
Toll Free: 800.999.9142
E-mail: [e-mail]