Instruction Manual

How can operate if only by Bluetooth for the WiFi and

Bluetooth dual mode modules?

The steps of only Bluetooth control are as follows:

1. Make sure that the Bluetooth has been turned on, and the

Bluetooth network distribution mode is used when the smart

power adapter device is connected to the network;

2. Power off the router used in the distribution network (turn off

the mobile hotspot if the mobile hotspot distribution network is

used) and turn off the mobile Wi-Fi, only keep on the mobile 4G

and Bluetooth , and then wait about 3 to 5 minutes;

3. After 3-5 minutes, the smart device will be automatically

switched to the Bluetooth control mode because it is

disconnected from the external network.

So the Bluetooth control function is only as one replacement

control way at present. But you will have to make sure the

Bluetooth is turned on when the smart device is connected to

the network and the wifi router is powered off or the wifi router

is broken without any signal emission.