User's Manual

13
Figure 4-6 Setting frequency
APN Management 4.2.7
1. To set and manage APN, perform the following steps:
2. Choose Network Setting>APN Management.
3. In the APN Management area, you can set the APN.
4. Choose an APN number which you want to set.
5. In the APN Setting area you can set the APN parameters, such as enable or
disable the APN, APN name, username, password and so on.
6. If you want set an APN as default gateway, you should check that is enabled.
7. Click “Submit”.
Figure 4-7 APN Management