Installation Guide

Nova-233 G2 Outdoor LTE TDD Base Station Installation Guide
4
Item
Description
Receive Sensitivity
-100 dBm
Synchronization
GPS, 1588 V2
Backhaul
1 Optical (SFP) and 1 RJ-45 Ethernet interface (1 GE)
MIMO
DL 2 x 2
Dimension
227mm (H) x 305mm (W) x 74mm (D)
Installation Type
Pole, wall
Antenna
External 17dBi directional antenna
Vertical beamwidth: 35°
Horizontal beamwidth:65°
Downtilt angle: 8.5°
Height: 30m
Overall Power
< 45 W
Power
48V DC, AC adaptor (multi-national standards)
Weight
About 4.4 kg
Note: The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on
5MHz bandwidth, FRC A1-3 in Annex A.1 (QPSK, R=1/3, 25RB) standard.
1.4.2 Software Specification
Item
Description
LTE Standard
LTE TDD 3GPP Release 9
Maximum Throughput
 20 MHz:
SA1: DL 80 Mbps, UL 28 Mbps
SA2: DL 110 Mbps, UL 14 Mbps
 10MHz:
SA1: DL 40 Mbps, UL 14 Mbps
SA2: DL 55 Mbps, UL 7 Mbps
Business Capacity
96 concurrent users
Modulation Mode
UL: QPSK, 16QAM, 64QAM
DL: QPSK, 16QAM, 64QAM
Voice Solution
CSFB, VoLTE, eSRVCC
Traffic Offload
LIPA (Local IP Access)
SIPTO (Selected IP Traffic Offload)
SON
Automatic setup
ANR (Automatic Neighbor Relation)
PCI confliction detection
Spectrum Scanning
Supported
UL Interference
Detection
Supported
RAN Sharing
Supported
Network Management
TR069