Installation Guide

Nova-233 G2 Outdoor LTE TDD Base Station Installation Guide
3
The Nova-233 G2 interfaces are described in Table 1-1.
Table 1-1 Nova-233 G2 Interface Description
Interface Name
Description
PWR
Power interface: +48V (+42V~+60V) DC
GPS
External GPS antenna, N-female connector.
ANT0
External antenna 0, N-female connector.
OPT
Optical interface, connect to external transmission network,
used for data backhaul.
ETH
RJ-45 interface, used for debug or data backhaul.
ANT1
External antenna 1, N-female connector.
The Nova-233 G2 interface indicators are described in Table 1-2.
Table 1-2 Nova-233 G2 Interface Indicators
Identity
Color
Status
Description
PWR
Green
Steady On
Power On
OFF
No Power Supply
RUN
Green
Fast flash: 0.125s
on,0.125s off
The board is loading.
Slow flash: 1s on,1s
off
The board is normal.
OFF
No power input or board fault
ACT
Green
Steady On
The transmitting channel works
normally
OFF
The transmitting channel works
abnormally
ALM
Red
Steady On
Hardware alarm, e.g. VSWR alarm
OFF
No alarm
Technical Specification
1.4
1.4.1 Hardware Specification
Item
Description
LTE Mode
LTE TDD
LTE Band
band48 (3550 MHz ~ 3700 MHz)
Channel Bandwidth
10/20 MHz
MAX Output Power
30dBm/Ant