Installation Guide

LTE TDD Base Station Installation Guide
4
Item
Description
Receive Sensitivity
-100 dBm
Backhaul
1 Optical (SFP) and 1 RJ-45 Ethernet interface (1 GE)
MIMO
DL 2 x 2 on each carrier
Dimension
310mm(H) x 239 mm(W) x 105 mm(D)
Installation Type
Pole, wall
Antenna
External high gain antenna
Overall Power
< 60 W
Power
48V DC, AC adaptor (multi-national standards)
Weight
About 5.5kg
Note:
The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on 5MHz
bandwidth, FRC A1-3 in Annex A.1 (QPSK，R=1/3，25RB) standard.
1.4.2 Software Specification
Item
Description
LTE Standard
3GPP Release 12
Peak Rate
 2x20 MHz:
SA1: DL 80 Mbps, UL 28 Mbps (per cell)
SA2: DL 110 Mbps, UL 14 Mbps (per cell)
 2x10MHz:
SA1: DL 40 Mbps, UL 14 Mbps (per cell)
SA2: DL 55 Mbps, UL 7 Mbps (per cell)
User Capacity
96 concurrent users per cell/carrier
192 concurrent users per eNodeB
Modulation
UL: QPSK, 16QAM, 64QAM
DL: QPSK, 16QAM, 64QAM
Voice Solution
CSFB, VoLTE, eSRVCC
Traffic Offload
LIPA (Local IP Access)
SIPTO (Selected IP Traffic Offload)
SON
Automatic setup
ANR (Automatic Neighbor-cell Recognition)
PCI confliction detection
Spectrum Scanning
Supported
UL Interference
Detection
Supported
RAN Sharing
Supported
Network Management
Interface
TR069 interface protocol