User manual

30
kinked or trapped when the oven is in position. Care must be
taken to avoid the cable being in contact with hot parts of the
appliance.
Replacing the mains supply cable
o If the mains supply cable is damaged, then it must be replaced
with a suitable replacement.
o The mains supply cable should be replaced in accordance with
the following instructions:
o Switch the appliance off at the socket.
o Open the terminal block on the back of the oven.
o Unscrew the terminal screws fixing the cable.
o Replace the cable with one of the same length and in accordance
with the specification.
o The “green-yellow” earth wire must be connected to the terminal
marked . It must be about 10 mm longer than the live and
neutral wires.
o The “blue” neutral wire must be connected to the terminal
marked with letter (N-5) - the live brown, black and grey wires
must be connected to the terminals marked with letters (L-1),(2)
and (3) respectively.