Product Manual

180W BAINTUFF FOLDABLE SOLAR BLANKET

WITH VICTRON PWM BlueSolar Regulator

Model 180W - BTBLANKET180

PWM

VICTRON BlueSolar PWM-Light

Output 5.5V/2A & 18V/10A

Rated Power 18V 180W

Folded Size 398 x 300 x 78mm

Unfolded Size 1830mm h x 775mm w

Weight 5.11kg

Solar Cell Monocrystalline sunpower solar cell

Solar Panel Matted PET laminated solar panel 8V16WX12pcs

Applications DC18V for 12V battery, laptop, USB5V for mobile

phone, ipad, digital camera

How to charge your device

1. Unfold the solar panels and spread them to direct sunlight.

2. USB 5V output: connect your 5V device to the USB port of the solar panel charger

with your original cable

3. DC18V output: connect the Anderson connector with solar charger controller and

then connect the clips with the batteries.

4. Place the connected device in the solar panel’s inside pocket, or keep it out of the

sunlight as direct sunlight and over-heat may damage the device.

PAGE 1
80W BAINTUFF FOLDABLE SOLAR BLANKET WITH VICTRON PWM BlueSolar Regulator Model 180W - BTBLANKET180 PWM VICTRON BlueSolar PWM-Light Output 5.5V/2A & 18V/10A Rated Power 18V 180W Folded Size 398 x 300 x 78mm Unfolded Size 1830mm h x 775mm w Weight 5.11kg Solar Cell Monocrystalline sunpower solar cell Solar Panel Matted PET laminated solar panel 8V16WX12pcs Applications DC18V for 12V battery, laptop, USB5V for mobile phone, ipad, digital camera How to charge your device 1.
PAGE 2
How to connect the blanket to your devices Warning and Safety Instructions The blanket comes with a supplied anderson cable and a Victron PWM Solar Controller. The solar controller is normally used when there is no internal controller in your equipment. ( i.e your car battery, or a secondary battery in a trailer.) 1. Risk of explosive gases: Working in the vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases during normal operation.