User Manual

How to control trackpad?
How to turn on rainbow backlight and change its colors?
Be sure that touchpad can be used on your iPad, you need to complete below steps:
Open your Generation Setting-Go to Accessibility-Go to Touch, under the Physical and Motor
section, turn on the AssistiveTouch toggle. And you can adjust the cursor speed by open iPad
Setting - Go to Accessibility - Go to Touch - Go to AssistiveTouch - Choose the Mouse Key to
adjust the tracking speed.
By the way, make sure your iPad Software Version is on 13.2.2 or above.
If you don’t use trackpad, you can press “fn” and “T” together to lock the trackpad.
Press “fn”+”light bulb”(right side of space bar) to turn on the backlight. By pressing
them again, you can adjust the brightness of backlight. There are 3 levels brightness, by
pressing 4th time, you will turn the backlight off.
Press “fn”+”RGB”(next to light bulb) to change different different rainbow colors. There are
various colors for you to choose.
Press “fn”+ “Q” to turn on the breathing backlight, backlight will flash at a rate. By pressing
“fn”+”W”, you can change the rate of backlight breathing.
By the way, pressing “fn”+ “Q” also can turn on the backlight, and pressing them again will
turn the backlight off.