Installation Manual
Warranty
BAK® Industries (“BAK”) warrants your BAKFlip Hard Folding Cover to be structurally free from defects in material
and
workmanship for the period as outlined in the table below from the retail date of purchase. Warranty registration must
be on file and/or proof of original purchase (detailed and dated receipt) required for warranty service. Warranty is non-
transferable and applies to the original purchaser of the BAK product only.
BAK reserves the right to determine whether a product needs to be repaired or replaced. No labor or service allowance
is given or implied. The warranty will be void if the product has been damaged by accident, unreasonable use, neglect,
improper service/installation/removal, modifications, acts of God or normal wear and tear or other causes not arising out
of defective materials or workmanship. BAK assumes no liability for injury, loss, incidental or consequential damages.
BAK reserves the right to substitute an entire replacement system or provide other remedies than those listed in this
warranty for discontinued products or other reasons. Shipping charges will apply for any repair or replacement.
BAK is committed to providing you with our best service at all times. Please feel free to contact us should you require any
assistance with your BAK product.
CARE AND MAINTENANCE
BAK Flip tonneaus are made from durable materials and require simple care to ensure a long life of performing well and
looking great.
BAK Flip G2, HD, MX4, Fibermax & F1
Cleaning the Top (Washing)
Standard automotive soap and water with a soft sponge or cloth is recommended for cleaning. Shammy dry to keep
the finish polished and brilliant. Wax is NOT recommended as it tends to fill in cracks and crevices, which may affect the
textured panel finish. Do NOT use any harsh cleaners or abrasives.
BAKFlip VP
Cleaning the Top (Washing)
These stylish covers incorporate OE marine grade vinyl laminated on the top surfaces. Standard automotive soap and
water used with a soft sponge or cloth is recommended for cleaning. Shammy dry to prevent water spots and ensure a
rich dark finish.
Treating the Vinyl Top
3M 303 Aerospace Protectant may be used to keep the vinyl surface clean and protected from the elements and will also
remove any water spots that may have developed. 303 Aerospace not only protects against fading, discoloration and
cracking from harmful UV rays, but repels dust and stains. Simply spray on and wipe dry for a beautiful, matte finish that
protects your cover from road grime and dust.
All BAKFlip
Maintenance
It is recommended that you periodically check your cover is securely attached to your truck bed. Inspect the clamps and
front mounting bolts to ensure they were properly installed and have not come loose or knocked out of adjustment
during operation. Covers that are used with high frequency or that are subject to the vibrations and impact from rough
roadways can cause the cover to require adjustment.
Lubricating the Latches
It is recommended that you periodically inspect and service the latches on each panel. Clean away any excess dirt or
grime and lubricate with silicone spray. Ensure the latches move freely in and out to properly engage the side rail and
provide proper performance with optimum security. Be careful not to overspray the cover. Wipe away any excess around
the latch location.
©Laurmark Enterprises, Inc., 2018
BAK Industries • 1100 N. Glenstone Ave. Suite 140, Springfield, MO 65802 • 844-779-8986 • bakindustries.com
Part# 318A0029 Rev. A
PRODUCT WARRANTY PERIOD
BAKFlip VP 1 Year Limited Warranty
BAKFlip G2 2 Year Limited Warranty
BAKFlip MX4 3 Year Limited Warranty
BAKFlip HD 2 Year Limited Warranty
BAKFlip FiberMax 2 Year Limited Warranty
BAKFlip F1 3 Year Limited Warranty
REGIS TER YOUR
WARRANTY
NOW AT
BAKINDUSTRIES.COM