Installation Manual

ManualsBrandsBAK ManualsAutomotiveBAKBox2 Utility Storage Box | 92207 | fits 2009 - 19 Dodge Ram W/O Ram Box 5' 7"

BAK Industries • 1100 N. Glenstone Ave. Suite 140 Springﬁeld, MO 65802 • 844-779-8986 • bakindustries.com

Part# 318A0044 Rev. B

Parts will be shipped to you directly. Call 844-779-8986 Mon - Fri

Any damaged or missing parts?

INSTALLATION SHEET

PARTS INCLUDED IN YOUR KIT

HARDWARE BAG INCLUDING

TOOLS RECOMMENDED

1x 3-sided folding panels

2x large end plates

1x sliding tray

1 pair of clamping brackets (A & B - for BAKFlip)

1 pair of clamping brackets (C for Revolver X2& Revolver X4)

4x U-nuts

4x #8-32 2” Bolts

8x #8-32 1” Bolts

8x Lock Nuts

Phillips screwdriver

11/32” wrench

Install U-nuts onto clamping bracket,

the threaded section faces outward.

BAKFlip: Install on side marked- B

RevolverX2 & Revolver X4:

Install on side marked- C

truck bed covers

8:30 am - 7 pm EST or email support@bakindustries.com

Assemble the clamping bracket loosely

to the large end plates, for both

passenger and driver sides.

Tailgate Side

Cab Side

Summary of content (4 pages)

PAGE 1
INSTALLATION SHEET Any damaged or missing parts? Parts will be shipped to you directly. Call 844-779-8986 Mon - Fri 8:30 am - 7 pm EST or email support@bakindustries.com HARDWARE BAG INCLUDING 1 pair of clamping brackets (A & B - for BAKFlip) 1 pair of clamping brackets (C for Revolver X2& Revolver X4) 4x U-nuts 4x #8-32 2” Bolts 8x #8-32 1” Bolts 8x Lock Nuts TOOLS RECOMMENDED Phillips screwdriver 11/32” wrench 1 Install U-nuts onto clamping bracket, the threaded section faces outward.
PAGE 2
3 Install the large end plates onto the rails. Do not fully tightening for future alignment. Finished installation with Revolver X2 & X4 rail. Finished installation with BAKFlip rail. Important considerations for alignment of the large end plates: The top mounting ﬂange of the large end plate inserts into the rail just below the cover resting surface. Clamping brackets may have to be moved if they interfere with rail clamps.
PAGE 3
4 Place the 3-sided folded panels into the mounted large end plates. The side with hook & loop fastener strips unfolds towards the tailgate, while the side with pre-drilled holes will fold up toward the cab. Cab Side Tailgate Side 5 Install the 1” bolts and nuts to mount the cab side panel to the large end plates. 4 bolts and nuts each side, top and bottom, utilizing the large end plate slots. Center the box panels. The sliding tray rests on the top of the box sides. BAK Industries • 1100 N.
PAGE 4
Product Operation The weight rating is an evenly distributed 250 lbs. When folded, the Box stows into the space towards the Cab. To secure the Box in the open position make use of the provided hook & loop straps. To secure the Box in the folded position, simply fold over the top toward the cab. Cab Side Cab Side Care and Maintenance BAKBox Utility Box’s are made from durable FRP (Fiberglass Reinforced Polymer) with EPS core and frames of aircraft grade aluminum with a black powder coating.