RollerMouse Re:d ® User Guide
Box contents 1. 2. 3. 4. 5. 6.
RollerMouse functions A. B. C. D. E. F. G. H.
Keyboard positioning Before plugging in the unit take a moment to check the height and angle of your keyboard, and find the arrangement that’s most comfortable for you. The package includes keyboard risers that can help you to achieve the correct angle and height regardless of the type of keyboard you are using. The spacebar on your keyboard should come just above your Rollerbar. To achieve a proper ergonomic position, the top of the keyboard should be level.
Inserting the keyboard risers Fit the end of the short riser into the slot on the back of the RollerMouse unit. Press the end of the long riser the top of the short riser. over Adjust keyboard risers to preferred angle and height.
Connecting to a computer Using the Rollerbar The Rollerbar • • Plug the RollerMouse Re:d into your computer’s USB port. Allow your computer a few seconds to automatically install it. 6 provides two functions: Pressing down on the Rollerbar performs a left-click. Moving the Rollerbar side to side and up and down performs cursor movement.
Changing cursor speed Rollerbar click force adjustment Press button to change cursor speed. There are five speed selections from slow to fast that are indicated by the LEDs. Click force refers to how hard or soft it is to click the Rollerbar. To change the click force, press and hold both the and the button for two seconds, the LED light will show current click force setting. While continuing to hold button release button and use scroll wheel to change click force setting.
Click volume adjustment To change the click volume setting, press and hold both the and the button for two seconds, the LED light will show current click volume setting. While continuing to hold button release button and use scroll wheel to change click volume setting. Let go of to select click volume setting. Changing the ‘Double’ Click button to Middle Button Function To change button from double click function to a middle button function, hold button and for two seconds until LEDs flashes to confirm.
Wrist rest We recommend that you use the wrist rest , however, if for any reason you would like to remove the wrist rest, lift the front edge of the RollerMouse and rest it in your left hand. Fit the wrist rest removal key into the slot at the right end of the unit and twist the key counter-clockwise. To install the wrist rest after removal, snap it into the slot on the front edge of your RollerMouse Re:d.