Operation Manual

~ P.10 ~
The screen displays the sun-moon position of the current time. Hitting the [ ] button will switch into
the screen for sun-moon rising & setting time, similar to the below image.
The screen displays the both the Sun-Moon rising and setting times for the current date.
You are able to change the date to another desired date by using the arrows (see previous section on
Moon Phase).
Hit the [Esc] button to exit the Sun-Moon Rise/Set Times screen and return to the Information Board main
screen. Hitting the [Esc] button again will bring you back to the main menu.
4. CLOCK
The Clock icon is located at the upper right hand corner of the Main Menu. Once the icon has been
highlighted (see the above image) press the [ ] button to confirm your selection. The clock main
screen defaults to a black screen.
4.1 Changing the background image to a prerecorded photo.
Once you are in the main screen of the clock use the “<” and “>” arrows to change the default black
screen to a prerecorded photo.
4.2Changing the background image to an uploaded photo.
Make sure the memory card with the photo is inserted in the unit. Once you are in the main screen of
the clock use the “<” and “>” arrows to recall a photo from the memory card.
4.3 Setting/Changing the alarm
Once you are in the main screen of the clock, hit the “/\” or “\/” arrows to select Bell icon. If the bell is
visible, the alarm is ‘ON’. If invisible, the alarm is ‘OFF’.
To change the alarm time,
- Hit [ ] button to highlight the hour digits, hit the “/\” or “\/” arrows to change the hour;
- Hit [ ] button to highlight the minute digits, hit the “/\” or “\/” arrows to change the minute;
- Hit [ ] button when finish.
Note: The alarm output is in buzz sound.
4.4 Changing the time
The time can only be adjusted from the Settings Menu. Please refer to the time setting description on the
setting menu.
(ENG)