Operation Manual

~ P.6 ~
(ENG)
GETTING STARTED
The 272766/R Colour Weather Station was designed for easy set up. For best operation, the following
steps are required to be done in the proper sequence.
a. Connect the adaptor power plug into the power socket of the Frame unit, and then plug in the power
adaptor into the wall Jack;
b. Weather station battery installation
The batteries must be installed into the weather station prior to start a RCC reception because they
supply the internal power for RCC reception
• Remove the battery door cover on the rear side of the frame unit;
• Insert x3 AAA size 1.5V alkaline battery as indicate by the polarity;
• Close the battery door.
Note: The batteries must be replaced when the low battery indicator LED is illuminated. Otherwise, the
clock time in the picture frame is no longer accurate.
c. Press the power switch to turn on the Frame unit.
1. WELCOME SCREEN
When the unit is powered on, the welcome will display for approx. 5 seconds. Then it will advance to
the Main Menu screen.
2. MAIN MENU
There are four icons on the Main Menu that you can choose from. Those icons are the INFO BOARD
(weather), CLOCK, SETTINGS, and PHOTOS. Each of these icons will be described in more detail later.
Use the directional arrows on the remote control or the buttons on the unit to move through the Main
Menu and highlight an icon. Once you have chosen an icon, hit the [ ] button to confirm your
selection and explore further. Once you are done exploring an icon, hit the [Esc] button to return to the
main menu. The main menu icons are not real-time active; the icons are just pictures that simulate the
detail screen.
The main menu icons are not real-time active; the icons are just pictures that simulate the detail screen.