Operation Manual

~ P.7 ~
3. INFO BOARD ICON
The Information Board Icon is located at the upper left hand corner of the Main Menu. Once the icon has
been highlighted (see the above image) press the [ ] button to confirm your selection.
There are five different sections to the Information Board main screen; Weather Report, Temperature
& Humidity, Pressure, Moon Phase, and Sun/Moon Rise/Set times. Use the 4 direction buttons to
navigate through the screen. Once the cursor has highlighted the desired section hit the [ ] button
to confirm the selection. When you are finished with an icon hit the [Esc] button to exit that screen and
return to the Information Board main screen. For general weather info, the first screen is preferred. For
more details on any of the 5 sections of the Info Board, select a section and hit enter.
3.1 Weather Report
The Weather Report section gives a summary of the current forecast, using historical weather data the
unit has received over the past 24 hours. It is derived from the barometric pressure changes over time.
The Weather Report section is the top left section of the Information board. See the below image with
this section selected.
Once this area is highlighted hit the [ ] button to confirm the selection. You are then take to a screen
similar to the below image.
Hit the [Esc] button to exit the Weather Report screen and return to the Information Board main screen.
Hitting the [Esc] button again will bring you back to the main menu.
Note: You can use the [ ] shortcut button on the remote to directly access the weather screen.
3.2 Indoor/Outdoor Temperature & Humidity
The Temperature & Humidity section is the second section on the left hand side of the Information
Board. See the below image for an example. This Weather Viewer product is 5-channel remote
transmitter capable, which means you can purchase other remote transmitters and place them indifferent
locations to monitor up to 5 locations. One remote transmitter is included which transmits on one
channel (usually, channel 1 to start).The temperature and Humidity section will show a number that tells
you the channel the unit is receiving. For example in the image below the number in the transmitter is a
(ENG)