Digital Photo Frame with Color Weather Station 272785 User Guide i Downloaded from www.Manualslib.
Part 1: Digital Photo Frame 1. Technical Specifications Picture/Display 7-inch LCD Resolution: 480x234 pixels Connectivity USB Host 2.0 Storage Media Memory Stick, Memory Stick Pro*, Memory Stick (Pro) Duo*, Multimedia Card, Secure Digital, SDHC, USB Flash Drive * Card adaptor needed Convenience Photo format supported: JPEG (Up to 12 Mega pixels) OSD Languages: English, French, Denmark, Italian, Spanish, Netherlands IR remote control Power supply: AC-DC adaptor 110-220V / 12V1.5A 1 Downloaded from www.
2. Operations A. GETTING STARTED The 272785 Digital Photo Frame with Color Weather Station was designed for easy set up. For best operation, the following steps are required to be done in the proper sequence. Connect the adaptor power plug into the power socket of the Frame unit, then plug in the power adaptor into the wall Jack. Note: The socket-outlet shall be installed near the equipment and shall be easily accessible.
Key layout of IR remote control is shown below. IR remote control battery replacement: 1. Remove the Battery Holder by pressing the retaining clip sideways (1) and pulling the holder out (2) (see diagram at right); 2. Note the orientation of the old battery before removing it from the Battery Holder; 1 3. Remove old battery and replace with a new 3-volt lithium CR2025 battery in the same orientation as the old battery; 4.
B. PHOTO MODE Press [ENTER] button to enter photo viewer mode Press [ENTER] button to view full screen photo Press [ ] button to begin a four-image slide show 4 Downloaded from www.Manualslib.
Table 1 Photo mode functions table with remote control Button Function ENTER View photo in full screen View previous photo when viewing photo in full screen View next photo when viewing photo in full screen Cropping images to fit screen Showing images without cropping to fit hot key, enter Weather Forecast & Clock mode under Photo Mode Invoke setup menu, press the Arrow Buttons to select menu SETUP function, press [ENTER] button on the remote control to confirm your selection.
8 1. [ M ] Button: Enter menu setup mode. 2. [ ] Button: Move right. 3. [ ] Button: Move up. Show cropping to fit. 4. [ ] Button: View photo in full screen. View the slide show photo. 5. [ ] Button: Move down. Show images without cropping to fit. 6. [ ] Button: Move left. 7. [ C ] Button: Exit a menu. 8. Power Switch: Slide it to turn the unit on/off. SETUP MENU 6 Downloaded from www.Manualslib.
[SETUP] Press the [SETUP] button on the Remote Control to access the setup menu. [ ][ ] Use the [ ] and [ ] buttons to select a menu item. [ ] Press the [ ] button on the Remote Control back to last menu. [ ] Press the [ ] button on the Remote Control to access an item’s submenu choices. [ENTER] Press the [ENTER] button on the Remote Control to confirm your selection. [EXIT] Press the [EXIT] button on the Remote Control (to the previous Setup menu).
On: Images will display in random order. Off: Images will display in alphanumeric order. Crop to Fit: On: Show images with cropping to fit. Off: Show images without cropping to fit. Start Slide Show: Start Full Screen: View photo with full screen. Start Split Screen: View photo with split screen. Rotate: Press the soft button once, the image is rotated 90° counterclockwise.
4. Three drive letters entitled ‘Removable Disc’ will appear under the ‘My Computer’ icon in Windows; one for each of the memory card slots on the Digital Picture Frame. With a card inserted, double-click the appropriate ‘Removable Disc’ icon to access that card to copy and delete files between your computer and all installed memory cards.
Part 2: Weather Forecast & Clock A.
Button Function lower part of the screen Hot key, enter Weather Forecast & Clock show Invoke setup menu, press the Arrow Buttons to select menu SETUP function, press [ENTER] button on the remote control to confirm your selection. N/A Hot key, start slide show under Weather Forecast & Clock mode Hot key, display 4 photos in a split screen to playback of all images under Weather Forecast & Clock mode N/A ZOOM Brightness up + Brightness down _ Return to previous screen EXIT B.
Set Date/Time: 1. While “Set Date/Time?” appears in the screen, press [ENTER] button on Remote Control or top panel to enter “Set Hour”. 3. Press [ ] or [ ] button to increase or decrease hour digits. 4. Press [ ] button to enter “Set Minute”, press the [ ] or [ ] button to increase or decrease the minute digits. 5. Press [ ] button to enter “Set Time Format”, press the [ ] or [ ] button to select 12 Hr or 24 Hr time format. 6.
DCF 77 RADIO CONTROLLED CLOCK The remote sensor receives the time signal transmitted by Physikalisch-Technische Bundesanstalt (PTB) of Germany, which is regulated by 4 atomic clocks and in average deviates less than 1 second in 2 million years. PTB transmits the time signal (DCF77, 77.5kHz) continuously from Mainflingen, 25 km southeast of Frankfurt (am Main). It is expected that the signal can cover a distance of 1,500 km from the transmitter.
C. Weather forecast icon The weather station forecasts the weather condition for the next 12~24 hours based on the local air pressure changes. There are 5 kinds of weather conditions forecasted: Sunny, Sunny cloudy, Cloudy, Rainy and Stormy. Sunny Sunny cloudy Cloudy Rainy 14 Downloaded from www.Manualslib.
Stormy Main unit Displayed temperature range : 0°C to +50.0°C (32°F to +122°F) Temperature resolution : 0.1°C (0.2°F) Displayed humidity range : 20-90% Humidity resolution : 1% RF reception frequency : 868MHz Displayed temperature range : -20.0°C to +60.0°C (-4°F to +140°F) RCC reception temperature range : 0°C to +50.0°C (32°F to +122°F) Temperature resolution : 0.1°C (0.
