manual

ANALOG PROJECTION CLOCK 396255
INTRODUCTION
This Analog Projection Clock combines the conventional clock design with
modern technology, its features include:
Analog clock display.
Adjustable projected clock size.
Safe and long life LED lighting technology.
Desk placement or ceilings mount.
DESCRIPTION
Free Standing Body
Lens
USING THE AC ADAPTOR
The lighting of the Clock is powered by AC through the supplied switching
power AC adaptor.
Connect one end of the AC adaptor to DC IN on the Clock and the other to your
house power outlet.
SETTING THE TIME
1.Turn on the power by pressing
.
2. Project the clock on a white wall or
ceiling.
3. Focus the projector image by pulling
DC Power Input
Back Cover
Back Cover Lock
Base
Power On/Off
in and out the lens.
4. Open the back cover to expose the clock
module.
5. Set the correct time by turning the time
setting knob.
INSTALLING / REPLACING THE BATTERY
The battery is only for powering the clock. The lighting of the clock is powered
by A.C power.
1. Remove the back cover by pressing the lock on the back cover with one hand
and pushing down the back cover with another hand.
2. Insert one fresh AA battery in the compartment as indicated by polarity
symbols ( + and - ) marked inside.
3. Replace the back cover.
PLACING THE CLOCK
You can place the clock on the desk or mount on the ceiling.
On the desk
On the ceiling
1
2 3 4